ReadyLift 3" SST Lift Kit — 2022–2026 Toyota Tundra 4WD

The ReadyLift 3 Inch SST Lift Kit for Toyota Tundra 4WD 2022-2026 is a complete and properly matched bolt-on suspension lift that delivers 3 inches of front lift and 2 inches of rear lift for a near-level stance, improved ground clearance, and clearance for up to 35x12.50 tires on 18x9 wheels at plus 12mm offset without cutting, welding, or permanent modifications to the factory truck. 

This kit includes tubular steel upper control arms with heavy-duty ball joints for strength and alignment geometry correction, a high-strength CV axle kit for enhanced durability under load, and all required hardware and instructions for a complete installation. At IMM Hawaii Parts, we carry this kit for new-generation Tundra 4WD owners who want a reliable and well-engineered lift system that delivers the stance, clearance, and geometry correction needed for a properly built Tundra without unnecessary complexity.

ReadyLift 3 Inch SST Lift Kit for Toyota Tundra 4WD 2022-2026 Includes Tubular Steel UCAs With HD Ball Joints

The tubular steel upper control arms in this lift kit are one of the most important upgrades over a basic spacer lift for the 2022 through 2026 Tundra. At 3 inches of front lift, the factory upper control arms operate at ball joint angles they were not designed to handle long-term, which leads to accelerated wear and compromised front-end geometry. The tubular steel UCAs in this ReadyLift kit are built with heavy-duty ball joints that are engineered to handle the increased operating angles of a lifted Tundra without premature wear, and they are designed to maintain proper alignment geometry after the lift is installed. Customers at IMM Hawaii Parts appreciate that this kit includes geometry-correcting UCAs rather than requiring a separate purchase to address ball joint angle issues.

High Strength CV Axle Kit for Enhanced Durability

In addition to the upper control arms, this kit includes ReadyLift's CV Axle Kit 67-52420CV, which provides enhanced CV axle durability under the increased operating angles that come with a 3-inch front lift on the new generation Tundra. The factory CV axles are not designed to handle the stress of operating at lifted angles indefinitely, and running a big lift without addressing CV axle strength can lead to premature failure, particularly under hard acceleration and off-road use. Including the CV axle kit in this system reflects ReadyLift's commitment to building lift systems that address the full scope of what a 3-inch lift does to the drivetrain rather than just the ride height.

3 Inch Front Lift and 2 Inch Rear Lift for a Near Level Stance

This SST system delivers 3 inches of front lift through the front lift components and 2 inches of rear lift through the included rear spacer kit, creating a near-level stance from front to rear that gives the 2022 through 2026 Tundra a more aggressive and balanced appearance compared to the factory rake. The near-level configuration also improves approach angle and ground clearance across the front of the truck, which benefits both trail performance and daily driving over uneven terrain. The factory ride quality and turning radius are preserved throughout the installation.

Clears 35x12.50 Tires on 18x9 Wheels at Plus 12mm Offset

This lift kit is verified to clear 35x12.50 tires on 18x9 wheels at plus 12mm offset without trimming or rubbing on the 2022 through 2026 Tundra 4WD. Running 35 inch tires on a lifted Tundra gives the truck a significantly more capable and aggressive appearance while improving ground clearance for off-road use and trail driving. Actual fitment can vary by tire brand and tread design, so always verify clearance on your specific truck before finalizing the wheel and tire setup. Contact IMM Hawaii Parts for personalized wheel and tire recommendations for your Tundra build.

True Bolt-On Installation With No Cutting or Welding

Every component in this kit is designed to install using a true bolt-on process with no cutting of factory components and no welding at any stage of the installation. The front lift components, rear spacer kit, tubular UCAs, and CV axle kit all use existing factory mounting points and hardware locations, keeping the factory structure of the Tundra completely intact throughout the installation. Professional alignment is recommended after the lift is complete to ensure the front end tracks and handles correctly with the new UCAs and lift height.

Important Notes Before Purchasing

This kit does not fit TRD Pro Tundra models or trucks equipped with the Load Leveling Rear Height Control Air Suspension. Always confirm your specific Tundra trim and suspension configuration before ordering.

Product Details

Who Should Choose This Kit?

The ReadyLift 3 Inch SST Lift Kit for Toyota Tundra 4WD 2022 through 2026 Tundra 4WD owners who want a complete bolt-on lift system with tubular steel UCAs, a CV axle kit, and verified clearance for 35x12.50 tires without cutting or welding. Shop this kit and complete Tundra wheel and tire packages at IMM Hawaii Parts, where our team can help you build the perfect lifted Tundra setup from the ground up.

Need help choosing the right parts for your vehicle? Contact IMM Hawaii Parts today for expert advice and trusted customer support.