The ReadyLIFT SST Lift Kit Toyota FJ Cruiser and 4Runner is a complete suspension lift solution that delivers 3 inches of front lift and 2 inches of rear lift while preserving the factory ride and handling characteristics that make these trucks enjoyable to drive every day. Designed around ReadyLIFT's Smart Suspension Technology, the 69-5060 kit gives FJ Cruiser and 4Runner owners a meaningful increase in ground clearance and room for wheel and tire combinations up to 33 inches in diameter without requiring cutting, spring preloading, or complicated modifications to get it done.
ReadyLIFT SST Lift Kit Toyota FJ Cruiser and 4Runner Delivers a Bolt-On Install.
Every component in this lift kits is designed to bolt on using the existing mounting points and factory hardware locations on the FJ Cruiser and 4Runner, making installation straightforward for a competent DIY installer or professional shop. The powder-coated steel strut extensions and front differential drop brackets are engineered to maintain safe OE suspension geometry after the lift is installed, delivering the ride height increase without compromising the handling balance or safety characteristics of the factory setup. Detailed step-by-step instructions are included with every kit to guide the installation from start to finish.
3 Inch Front Lift With Differential Drop for Proper CV Geometry
The front of this system uses powder-coated steel strut extensions that provide 3 inches of front lift height over stock. Front differential drop brackets are included to correct the CV operating angles after the lift is installed, reducing the bind and wear that occur when CV joints are pushed to steep angles without a proper drop correction. Skid plate spacers are also included to maintain the factory skid plate position relative to the lifted front end. Together, these components provide the front lift height while keeping the suspension geometry within safe operating parameters.
2 Inch Rear Lift With Spring Spacers for a Level Stance
The rear of this kit uses rear lift spring spacers to deliver 2 inches of rear lift that works with the 3-inch front lift to give the FJ Cruiser and 4Runner a slightly raked stance when lightly loaded. This intentional rake provides a more neutral and level appearance when the truck is carrying passengers and cargo, which is how these trucks are typically used. The rear spacers install on top of the existing rear springs without requiring any cutting or modification to the factory rear suspension components.
Fits Up to 33 Inch Tires Across Multiple Wheel Sizes
This lift kit creates enough clearance to run tires up to 33 inches in diameter on the FJ Cruiser and 4Runner. The recommended no-rub fitment is 33x11.50 on a 9-inch-wide wheel with a plus-6 offset. Common sizes by wheel diameter include 295/65R18 on 18-inch wheels, 285/60R20 on 20-inch wheels, and 285/50R22 on 22-inch wheels. Larger tires or more aggressive wheel offsets may require trimming of plastic or metal components to achieve a no-rub condition. ReadyLIFT recommends test fitting every wheel and tire combination before final installation.
What Is Included
|
Component
|
Details
|
|
Strut Extensions
|
Powder Coated Steel
|
|
Front Differential Drop Brackets
|
Included
|
|
Skid Plate Spacers
|
Included
|
|
Rear Lift Spring Spacers
|
Included
|
|
Installation Hardware
|
Heavy Duty
|
|
Instructions
|
Step-by-step included
|
Compatibility Notes
This kit is not compatible with TRD Pro models, X-REAS suspension, or KDSS suspension-equipped vehicles. Confirm your specific trim and suspension configuration before ordering. ReadyLIFT wheel and tire recommendations are based on Wheel Pros wheels and Nitto tires. Actual fitment varies by manufacturer, so every combination should be test-fit before final installation.
Product Details
|
Specification
|
Details
|
|
Compatible Vehicles
|
2005 to 2014 Toyota FJ Cruiser, 2003 to 2024 Toyota 4Runner
|
|
Brand
|
ReadyLIFT
|
|
Part Number
|
69-5060
|
|
Front Lift
|
3 inches
|
|
Rear Lift
|
2 inches
|
|
Installation
|
Bolt-on, No Cut
|
|
Max Tire Size
|
33 inches
|
|
Optimized Fitment
|
33x11.50 on 9-inch wheel, plus 6 offset
|
|
Warranty
|
Lifetime Against Manufacturing Defects
|
|
Not Compatible
|
TRD Pro, X-REAS, KDSS
|
Who This Kit Is For
The ReadyLIFT SST Lift Kit Toyota FJ Cruiser and 4Runner is the right choice for owners who want a complete, bolt-on suspension lift with 3 inches of front lift and 2 inches of rear lift, proper differential drop correction, and clearance for up to 33-inch tires. Backed by a lifetime warranty against manufacturing defects and designed to maintain factory ride quality, this kit is a reliable and well-engineered lift solution for FJ Cruiser and 4Runner owners who want more capability without more complexity.
Have questions about fitment, installation, or product selection? Get in touch with IMM Hawaii Parts, and our team will be happy to help.
