ProComp 6" Lift Kit for 16-23 Toyota Tacoma 4WD & PreRunner

Six inches of lift is a major upgrade for any Tacoma, and the parts you choose to get there make the difference between a truck that drives great every day and one that feels off every time you turn the wheel. The ProComp 6" lift Kit Toyota Tacoma system for 2016 to 2023 4WD and PreRunner models is engineered as a complete package that keeps the factory steering feel and on-road manners intact while delivering serious stance, ground clearance, and tire fitment for larger 33 to 35 inch tires. For Hawaii drivers building a real lifted Tacoma, this is the kind of system that lets you go big without losing daily comfort.

Why the ProComp 6" lift Kit Toyota Tacoma System Stands Out

A lot of 6-inch kits give you the height you want, but ruin the way the truck drives. The Pro Comp system is engineered as a full kit, which means every part is designed to work with every other part right out of the box. That whole system approach is what keeps the steering feel close to factory, the ride composed on the highway, and the wear on tie rods, ball joints, and bushings closer to normal than what cheaper lifts produce. Tacoma owners who actually drive their truck every day get height without the headaches.

Pre-Assembled Front Components for Faster Install

Front lift installs on Tacomas can eat a full day, especially when assembling coilovers and brackets piece by piece. The Pro Comp system ships with pre-assembled front components, which cuts hours off the install time at the shop or in the garage. The pieces come ready to bolt in, so the focus stays on a clean fit instead of fighting individual parts on the bench.

Heavy Duty One Piece Crossmembers and Extended Knuckles

The structural backbone of any serious lift is the crossmember and knuckle setup. This kit uses heavy-duty one-piece crossmembers and extended knuckles built to handle the new geometry that 6 inches of lift creates. One-piece construction is much stronger than welded multi-piece designs, which matters during hard trail driving, heavy braking, and full load cornering. The extended knuckles correct the steering geometry so the truck still tracks straight and turns predictably after the lift.

Rear Monotube Shocks for Smoother Ride Control

The rear shocks are monotube design, which gives better heat management and more consistent damping than twin tube shocks under load. Hawaii driving mixes long highway runs with quick trail bursts, and monotube shocks handle both well by keeping the oil cooler and the valving steady. The truck stays composed during washboard sections and absorbs hard hits without bottoming out as easily as cheaper shocks.

Matched Block and Add-A-Leaf Combo for Level Stance

Lifting the front of a Tacoma alone leaves the rear sitting lower, which kills the look and hurts the ride. This kit balances the truck out with a matched rear block and add-a-leaf combo that lifts the rear to match the new front height. The combination also gives the rear a small payload boost, which helps for owners carrying camping gear, tools, or trail recovery equipment regularly.

Built for 16-23 Tacoma 4WD and PreRunner

The kit is specifically engineered for 2016 to 2023 Toyota Tacoma 4WD and PreRunner trims, which share enough of the front suspension architecture for one kit to cover both. Confirming your trim and year before ordering is always smart, especially if your truck has any aftermarket modifications already, but for stock 16-23 4WD and PreRunner Tacomas, this kit drops in as a complete bolt-on system.

Real Off-Road Capability With Daily Drivability

The whole point of a 6-inch lift is to do more on the trail without giving up daily use. The Pro Comp kit hits that target by combining serious height, durable components, and ride-tuned damping into one cohesive package. The truck handles bigger tires, clears larger obstacles, and turns into a real overland or trail rig, while still feeling like a Tacoma during the morning commute.

Product Specifications

What You Get

Best For: 2016 to 2023 Toyota Tacoma 4WD and PreRunner owners who want a serious 6-inch lift with bigger tire fitment, real trail capability, and ride quality that still feels good on daily drives across the islands.

For Hawaii Tacoma drivers building a real lifted truck that handles both daily life and rough trails, the ProComp 6" lift Kit Toyota Tacoma system brings the height, strength, and ride tuning that a serious build deserves. IMM Hawaii Parts also handles complete lift kit installation, wheel and tire setup, and post-install alignment at our Maui shop, so you can plan the whole build and roll out trail-ready in one visit.