ProComp 19-24 RAM 1500 4WD 6″ COMPLETE KIT

The ProComp Ram 1500 4WD 6 Inch Complete Lift Kit 2019-2024 is for DT new body style owners who want a true 6-inch stance, serious tire clearance, and a complete lift system that addresses front geometry, rear travel, driveline angles, and all supporting hardware in a single package. From high-strength extended steering knuckles and fabricated front strut spacers up front to heavy-duty crossmembers with integrated differential and sway bar drops, rear coil spring spacers, and tuned rear monotube shocks, this system gives the new-generation RAM 1500 the complete lift treatment it deserves without leaving critical geometry or supporting hardware as afterthoughts. At IMM Hawaii Parts, we carry this kit for RAM 1500 4WD owners who want a properly matched 6-inch lift system from a trusted name in suspension engineering.

ProComp Ram 1500 4WD 6 Inch Complete Lift Kit 2019-2024 With Extended Steering Knuckles

The high-strength extended steering knuckles in this kit are one of the most important components for maintaining factory steering geometry after a 6-inch lift is added to the RAM 1500. Standard strut spacers or basic leveling components push the strut down without addressing the steering knuckle geometry, which results in poor steering feel, accelerated ball joint wear, and reduced front suspension travel on a significantly lifted truck. The extended knuckles in this Pro Comp system keep the steering geometry within a safe and properly functioning range at 6 inches of lift, preserving the factory steering feel and front suspension travel that RAM 1500 owners depend on for daily driving confidence and towing stability.

Fabricated Front Strut Spacers With Pre-Pressed Studs

The fabricated front strut spacers in this kit are built with pre-pressed studs for a faster and cleaner installation process compared to spacers that require stud installation as a separate step during the build. The pre-pressed studs are part of what makes this a truly professional-grade lift kit rather than a collection of basic spacers, and they contribute to a more precise and secure strut mounting connection after the 6-inch lift is in place. These spacers are fabricated for strength and correct fitment on the 2019 through 2024 RAM 1500 4WD DT platform specifically.

Heavy Duty One-Piece Crossmembers With Integrated Differential and Sway Bar Drops

The one-piece front and rear crossmembers in this system are fabricated as heavy-duty units with integrated differential drop and sway bar drop built directly into the crossmember design. This integrated approach is stronger and cleaner than systems that use separate drop brackets bolted onto a standard crossmember, and it ensures the differential and sway bar are repositioned correctly as a unified assembly rather than through a collection of individual brackets. The integrated drops maintain proper driveline angles and sway bar geometry after the 6-inch lift, which is critical for preventing vibration, CV wear, and compromised handling stability at this lift height. Customers at IMM Hawaii Parts who understand the difference between a complete engineered system and a collection of basic lift components consistently choose this kit for its integrated crossmember quality.

Rear Coil Spring Spacers, Track Bar Bracket, and Tuned Rear Monotube Shocks

The rear of this system uses coil spring spacers to match the 6-inch front lift height, a rear track bar bracket to re-center the rear axle after the rear lift is installed, and longer links as required to maintain proper rear suspension geometry throughout the lift range. The tuned rear monotube shocks provide composed on-road damping for highway and daily driving use alongside the compliance and control needed for weekend trail use on the lifted RAM 1500. The monotube design delivers consistent rear damping performance through the full range of rear suspension travel without the aeration and inconsistency that twin-tube shocks develop during sustained hard use.

Supporting Hardware for Correct Suspension Travel

This complete kit includes skid plate protection, brake line solutions, and bump stop hardware to ensure the lifted RAM 1500 suspension operates correctly through its full range of travel after the 6-inch lift is installed. Bump stop extensions prevent premature contact at the limits of suspension travel, brake line hardware ensures safe routing at the new lifted height, and skid plates protect the undercarriage during off-road use. Having all of this supporting hardware included in the kit ensures a complete and properly finished installation without requiring separate purchases for critical components.

Important Compatibility Notes

This kit is designed specifically for the 2019 through 2024 RAM 1500 4WD DT new body style. It does not fit the RAM 1500 Classic DS body style, TRX models, or trucks equipped with factory Air Ride suspension. Certain trims and engine packages may require specific kit versions, so always verify the correct part number for your specific RAM 1500 configuration before ordering. Professional alignment is recommended after installation.

Product Details

Why This System Stands Out for RAM 1500 Owners

The ProComp Ram 1500 4WD 6 Inch Complete Lift Kit 2019-2024 owners who want a fully matched and properly engineered 6-inch lift system with extended steering knuckles, integrated crossmember geometry correction, tuned rear monotube shocks, and all supporting hardware included. Shop this kit and complete RAM 1500 wheel and tire packages at IMM Hawaii Parts, where our team can help you build the perfect 6-inch lifted RAM 1500 setup for towing, trail use, and daily driving.

Whether you're planning an off-road build or replacing worn components, contact IMM Hawaii Parts for expert advice and quality products.