2022-Up TOYOTA TUNDRA 3" SST KIT W/ AIR

The ReadyLift Toyota Tundra 3 Inch SST Lift Kit With Air Suspension is a premium bolt-on suspension upgrade engineered specifically for 2022 and newer Tundra owners whose trucks are equipped with Load Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension. Part number 69-52331 with CV Axle Kit 67-52420CV, this system delivers 3 inches of front lift and 1.25 inches of rear lift for a near-level stance while fully preserving the factory load leveling system operation, factory turning radius, and factory ride quality throughout.

At IMM Hawaii Parts, we carry this kit for new-generation Tundra owners with air suspension-equipped trucks who want a proper lift solution that was engineered for their specific suspension configuration rather than a generic lift that ignores the complexity of the factory air system.

ReadyLift Toyota Tundra 3 Inch SST Lift Kit With Air Suspension Includes High Angle CV Axle Kit

The high-angle CV Axle Kit 67-52420CV included in this system is one of the most important components for 4WD Tundra owners running 3 inches of front lift. Factory CV axles are not engineered to handle the increased operating angles and stress of lifted use indefinitely, and premature CV axle failure under hard 4WD use is a common result of running a significant front lift without addressing CV axle strength.

The high-angle CV axles in this kit maximize travel, reduce vibration at the increased operating angles created by the lift, and boost overall reliability during off-road and 4WD use. Customers at IMM Hawaii Parts consistently choose this kit over alternatives because the included CV axle kit addresses the full scope of what a 3-inch front lift does to the drivetrain.

Updated Tubular Steel Upper Control Arms With Corrected Ball Joint Pivot Angles

The tubular steel upper control arms included in this system feature corrected ball joint pivot angles specifically engineered for the 3-inch lift height on the 2022 and newer Tundra. Corrected pivot angles ensure the ball joint operates within a safe and sustainable range after the lift is installed, preserving front-end geometry and preventing the accelerated wear that occurs when factory arms are used at lifted ride heights. These UCAs also maintain the factory turning radius, which is an important practical advantage for Tundra owners who use their truck in tight spaces on job sites and in daily parking situations.

Billet Aluminum Rear Coil Spacers and Rear Air Spacers

The rear of this system uses 6061-T6 billet aluminum rear coil spring spacers combined with rear air spacers that work with the factory Load Leveling Rear Height Control system to deliver the 1.25-inch rear lift while maintaining full operation and range of the OEM load leveling functionality. Rear shock extensions are also included to keep the factory rear shocks in their correct operating position after the rear lift is installed. This attention to the complete rear suspension system is what makes this lift kit a proper air suspension-compatible lift solution rather than a basic front-only lift that leaves the rear air system unaddressed.

Near Level Stance With Preserved Factory Ride and Load Leveling

The combination of 3-inch front lift and 1.25-inch rear lift gives the 2022 and newer Tundra a near-level stance from front to rear that significantly improves the appearance and ground clearance of the truck without the nose-high or tail-high look that comes from mismatched front and rear lift heights. The factory load leveling system continues to operate through its full range after this lift is installed, which means the Tundra still adjusts the rear suspension automatically under heavy loads and towing conditions exactly as it did from the factory.

Tire and Wheel Fitment

This lift system clears 35x12.50 tires on 18x9 aftermarket wheels at plus 12mm offset without trimming. Factory 20-inch wheels are retained and compatible with this system. Factory 18-inch wheels are not compatible with this lift kit. Most aftermarket wheels fit this system, but always confirm fitment before installation. Contact IMM Hawaii Parts for personalized wheel and tire recommendations for your specific Tundra air suspension build.

Important Compatibility Notes

This kit is designed for 2022 through 2026 Toyota Tundra models equipped with Rear Height Control Air Suspension or Adaptive Variable Suspension. It is not compatible with TRD Pro models equipped with Bilstein coilover shocks or the optional TRD rear sway bar. Always confirm your specific Tundra trim and suspension configuration before ordering.

Product Details

Who Should Choose This Kit?

The ReadyLift Toyota Tundra 3 Inch SST Lift Kit With Air Suspension is built for 2022 through 2026 Tundra owners with Load Leveling Rear Height Control Air Suspension or AVS who want a complete and properly engineered lift system that preserves factory air suspension operation, includes high-angle CV axles, and delivers a near-level stance with clearance for 35x12.50 tires. Shop this kit and complete Tundra wheel and tire packages at IMM Hawaii Parts, where our team can help you build the perfect lifted Tundra setup that works with your factory air suspension from day one.

Need help choosing the right parts for your vehicle? Contact IMM Hawaii Parts today for expert advice and trusted customer support.