The ReadyLift 2 Inch Front Leveling Kit Toyota Tundra Sequoia, and 2023 through 2026 Toyota Sequoia is a premium bolt-on leveling solution that delivers 2 inches of front lift, corrects CV joint operating angles with included differential drop brackets, and creates clearance for up to 34-inch tires without cutting, welding, or making permanent changes to the factory vehicle. Part number 66-52201: This kit uses fabricated steel strut spacers with a durable black powder coat finish and CNC laser-cut steel brackets throughout for a precise and properly engineered fit on both the Tundra and Sequoia platforms. At IMM Hawaii Parts, we carry this kit for Tundra and Sequoia owners who want a clean factory-plus leveled stance and bigger tire clearance in a single complete and geometry-correct package.
ReadyLift 2 Inch Front Leveling Kit Toyota Tundra Sequoia With Differential Drop Brackets
The differential drop brackets included in this lift kit are what separate this leveling solution from basic strut spacer kits that add front lift height without addressing the downstream effects on the front differential and CV joint angles. When 2 inches of front lift is added without a differential drop, the CV joints operate at steeper angles than they were designed for, which accelerates wear and can cause vibration under load on 4WD models. The ReadyLift differential drop brackets reposition the differential to optimize CV joint operating angles throughout the leveled ride height, and the included polyurethane bushings control differential movement under load for improved driveline stability during acceleration and off-road use. Customers at IMM Hawaii Parts value this kit because it handles the complete geometry correction rather than just the lift height.
Fabricated Steel Strut Spacers With Black Powder Coat Finish
The front lift on this kit is achieved through fabricated steel strut spacers that are finished with a durable black powder coat for long-term corrosion resistance and a clean appearance under the vehicle. Fabricated steel provides the strength and rigidity needed to hold the 2-inch leveled height consistently through regular daily driving, highway use, and the occasional light off-road situation that Tundra and Sequoia owners encounter. The strut spacers install on top of the existing factory struts without requiring spring compression, keeping the installation process clean, straightforward, and accessible.
CNC Laser-Cut Steel Brackets for Precise Fit
The CNC laser-cut steel brackets used throughout this kit ensure precise dimensions and correct fitment on both the Tundra and Sequoia platforms without the gaps or misalignment that can occur with stamped or cast bracket alternatives. CNC laser cutting produces clean edges and consistent dimensions across every bracket in the kit, which translates into a properly aligned installation that maintains the correct geometry relationships between the leveling components and the factory suspension mounting points throughout the lift range.
Fits Up to 34 Inch Tires With a Verified No-Trim Setup
This leveling kit creates enough clearance on the 2022 through 2026 Tundra and 2023 through 2026 Sequoia to run tires up to 34 inches in diameter. The verified no-trim fitment is 295/60R20 tires on a 20x9 wheel with a plus-18 offset, giving owners a clear and confirmed starting point for their wheel and tire selection without uncertainty about fitment. For Tundra and Sequoia owners who want to step up to a more capable and aggressive tire size while maintaining a clean and factory-looking installation, this leveling kit provides the foundation to do it properly.
100 Percent Bolt-On With No Cutting or Welding
Every component in this kit installs using a bolt-on process that requires no cutting of factory components and no welding at any stage of the installation. The strut spacers, differential drop brackets, polyurethane bushings, and all CNC laser-cut hardware use the existing factory mounting points on the Tundra and Sequoia, preserving the factory structure of both vehicles completely throughout the installation. This clean and reversible approach is important for Tundra and Sequoia owners who want the leveled stance and bigger tire clearance without making permanent changes to their vehicle.
Important Compatibility Notes
This kit is not compatible with Tundra models equipped with factory rear air suspension or TRD Pro trims. Always confirm your specific Tundra or Sequoia trim and suspension configuration before ordering.
Product Details
|
Specification
|
Details
|
|
Compatible Vehicles
|
2022 to 2026 Toyota Tundra, 2023 to 2026 Toyota Sequoia
|
|
Part Number
|
ReadyLift 66-52201
|
|
Brand
|
ReadyLift
|
|
Lift Height
|
2 inches Front
|
|
Strut Spacers
|
Fabricated Steel with Black Powder Coat
|
|
Brackets
|
CNC Laser Cut Steel
|
|
Differential Drop
|
Included
|
|
Bushings
|
Polyurethane for Diff Movement Control
|
|
Max Tire Size
|
34 inches
|
|
No Trim Fitment
|
295/60R20 on 20x9 Plus 18 Offset
|
|
Install Type
|
100 Percent Bolt-On, No Cutting or Welding
|
|
Not Compatible
|
Tundra with Factory Rear Air Suspension, TRD Pro
|
Who Should Choose This Kit?
The ReadyLift 2 Inch Front Leveling Kit Toyota Tundra Sequoia is the right choice for 2022 through 2026 Tundra and 2023 through 2026 Sequoia owners who want a complete bolt-on front leveling solution with differential drop geometry correction, fabricated steel strut spacers, and clearance for 34-inch tires without cutting or welding. Shop this kit and complete the Tundra and Sequoia wheel and tire packages at IMM Hawaii Parts, where our team can help you dial in the perfect leveled setup for your truck or SUV.
Ready to upgrade your vehicle? Get in touch with IMM Hawaii Parts today for expert guidance and premium aftermarket parts you can trust.
