The ProComp 6 Inch Lift Kit for Toyota Tundra 4WD 2022-2025 and PreRunner is a complete and properly matched suspension system that gives new-generation Tundra owners a tough and level 6-inch stance, room for larger tires, and a fully engineered package that preserves factory steering feel and everyday drivability without cutting corners on the geometry and supporting hardware that make a 6 Inch Lift work correctly.
From high-strength extended steering knuckles and fabricated steel strut spacers with pre-pressed studs to heavy-duty one-piece crossmembers, differential and sway bar relocation, rear coil spring spacers, and tuned monotube rear shocks, this system covers the full scope of what a 6-inch lift requires on the new Tundra platform. At IMM Hawaii Parts, we carry this kit for 2022 and newer Tundra owners who want a properly engineered complete 6-inch lift from a trusted suspension brand rather than a basic spacer setup that ignores critical geometry requirements.
ProComp 6 Inch Lift Kit for Toyota Tundra 4WD 2022-2025 With Extended Steering Knuckles
The high-strength extended steering knuckles in this system are essential for maintaining correct front-end geometry after 6 inches of lift kit is added to the 2022 through 2025 Tundra. At 6 inches of lift, the ball joint and CV joint operating angles change significantly, and without extended knuckles, the front suspension operates with compromised geometry that causes premature wear, reduced steering precision, and poor front-end feel.
The extended knuckles in this Pro Comp kit keep the front-end geometry within a safe and properly functioning range at the 6-inch lift height, maintaining the factory steering character and front suspension performance that Tundra owners expect from a truck they drive every day and use for towing. Customers at IMM Hawaii Parts consistently point to the extended knuckle quality as one of the main reasons they choose this complete system over less comprehensive alternatives.
Fabricated Steel Strut Spacers With Pre-Pressed Studs for Faster Install
The fabricated steel front strut spacers in this system are built with pre-pressed studs that make the installation process faster and more precise compared to spacers that require stud installation as a separate step. Pre-pressed studs are correctly positioned and torqued before the spacer is installed on the truck, eliminating an installation step and producing a more consistent and professional finished result. Fabricated steel construction gives these spacers the strength needed to hold the 6-inch front lift height on the Tundra consistently through the demands of regular towing, hauling, and daily driving on the new-generation platform.
Heavy Duty One-Piece Crossmembers With Integrated Geometry Corrections
The one-piece crossmembers in this system integrate the differential drop and sway bar drop directly into the crossmember structure rather than relying on separate bolt-on brackets. This integrated approach is stronger and more precise than multi-bracket systems, and it ensures the differential and sway bar are correctly repositioned as part of a unified structural assembly after the 6-inch lift is installed. Proper differential positioning maintains correct CV and driveline angles, while correct sway bar geometry preserves the roll stability and handling confidence that Tundra owners need during highway towing and trail driving.
Rear Coil Spring Spacers and Tuned Monotube Rear Shocks
The rear of this system delivers matched rear lift through tuned rear coil spring spacers that work with the factory rear coil spring setup on the 2022 through 2025 Tundra. Tuned rear monotube shocks are also included to provide composed and controlled rear damping for on-road daily driving, loaded towing, and off-road trail use. The monotube design delivers consistent rear damping performance through the full range of rear suspension travel, giving the lifted Tundra a balanced front-to-rear suspension feel that works confidently in all the conditions a Tundra owner regularly encounters.
All Hardware Included for a Complete Installation
Brake line relocation hardware and all required mounting hardware are included in this kit for a complete installation that does not require sourcing additional components before the install can begin. Professional alignment is recommended after installation to confirm proper caster, camber, and toe settings with the extended knuckle geometry and 6-inch lift height in place.
Product Details
|
Specification
|
Details
|
|
Compatible Vehicle
|
2022 to 2025 Toyota Tundra 4WD and PreRunner
|
|
Brand
|
Pro Comp
|
|
Lift Height
|
6 inches
|
|
Front Components
|
Extended Steering Knuckles, Fabricated Strut Spacers with Pre-Pressed Studs
|
|
Crossmembers
|
Heavy Duty One-Piece with Integrated Differential and Sway Bar Drops
|
|
Rear Components
|
Tuned Coil Spring Spacers, Monotube Rear Shocks
|
|
Brake Line
|
Relocation Hardware Included
|
|
Hardware
|
Complete Package Included
|
|
Install Type
|
Bolt-On, Alignment Recommended
|
Who Should Add This Kit to Their Tundra Build
The ProComp 6 Inch Lift Kit for Toyota Tundra 4WD 2022-2025 Tundra 4WD and PreRunner owners who want a complete and properly engineered 6 Inch Lift system with extended steering knuckles, integrated crossmember geometry correction, and tuned monotube rear shocks. Shop this kit and complete Tundra wheel and tire packages at IMM Hawaii Parts, where our team can help you build the perfect 6-inch lifted Tundra setup for towing, trail use, and daily driving.
Need help choosing the right lift kit for your vehicle? Contact IMM Hawaii Parts today for expert guidance on fitment, installation, and performance.
