The ProComp 1.25-Inch Leveling Kit Chevy Colorado GMC Canyon is a clean and precise front leveling solution for 2015 and newer Colorado and Canyon owners, including ZR2 models, who want to reduce the factory rake, add 1.25 inches of front lift, and create clearance for larger tires without cutting, welding, or making permanent changes to the factory truck. Built from CNC machined billet aluminum spacers that install on the lower strut mount without cutting any bolts, this kit delivers a level and more aggressive stance in about an hour using basic hand tools. At IMM Hawaii Parts, we stock this kit for Colorado and Canyon owners who want a precise and durable leveling solution that fits cleanly and preserves the factory ride quality throughout.
ProComp 1.25-Inch Leveling Kit Chevy Colorado GMC Canyon CNC Machined Billet Aluminum Spacers
The front lift on this kit is achieved through CNC machined billet aluminum spacers that are precision machined to exact tolerances for a secure and properly fitted installation on the Colorado and Canyon lower strut mount. CNC machining produces tighter tolerances and a stronger finished part than cast or stamped alternatives, giving the spacers the structural precision needed to maintain correct strut alignment and front end geometry after the lift is installed. Billet aluminum construction keeps the overall weight of the spacers minimal while providing the rigidity needed to hold the 1.25-inch lift consistently through regular driving, trail use, and the demands of the ZR2 off-road platform. Customers at IMM Hawaii Parts appreciate the quality of construction that goes into these spacers compared to cheaper cast alternatives.
Installs on the Lower Strut Mount Without Cutting Bolts
One of the standout installation advantages of this leveling kit is that the billet aluminum spacers install directly on the lower strut mount without requiring any bolt cutting or permanent modification to the strut assembly. Many lower-quality leveling kits require the installer to cut the factory strut bolts during installation, which makes removal more difficult and can create complications down the road. The ProComp spacers for the Colorado and Canyon are designed to avoid this entirely, making the installation process cleaner, faster, and fully reversible without any damage to factory components.
Reduces Factory Rake and Creates Clearance for Up to 31 Inch Tires
The 1.25 inches of front lift from this kit reduces the forward rake that comes standard on the Colorado and Canyon from the factory, giving the front of the truck a more level and aggressive appearance that complements the capable character of both standard models and ZR2 builds. The additional clearance created by the leveled front end accommodates tires up to 31 inches in diameter without rubbing under standard conditions, giving Colorado and Canyon owners the ability to step up to a more capable and aggressive-looking tire package. Wheel width, offset, and specific vehicle variations may affect fitment, so always confirm your specific wheel and tire combination before finalizing your setup.
About an Hour to Install With Basic Tools
The entire installation process for this leveling kit can be completed in approximately one hour using basic hand tools, making it one of the most accessible leveling solutions available at IMM Hawaii Parts for Colorado and Canyon owners who want to complete the install themselves. The straightforward process and no-cut design keep the installation from becoming complicated or time-consuming, so you can have the leveled stance and added clearance you want without spending a full day in the garage.
Maintains Factory Ride Quality Throughout
This leveling kit is engineered to deliver the leveled front stance and increased clearance without degrading the factory ride quality that makes the Colorado and Canyon practical and comfortable daily drivers. The billet aluminum spacers work with the existing factory struts rather than replacing them, preserving the factory damping tune and spring rate throughout the installation for a ride character that remains familiar and comfortable even after the lift is added.
Product Details
|
Specification
|
Details
|
|
Compatible Vehicles
|
2015 and Newer Chevy Colorado including ZR2, 2015 and Newer GMC Canyon including ZR2
|
|
Brand
|
Pro Comp
|
|
Lift Height
|
1.25 inches Front
|
|
Spacer Material
|
CNC Machined Billet Aluminum
|
|
Install Location
|
Lower Strut Mount
|
|
Bolt Cutting Required
|
No
|
|
Max Tire Size
|
Up to 31 inches
|
|
Estimated Install Time
|
Approximately 1 Hour
|
|
Factory Ride Quality
|
Preserved
|
Who This Kit Is For
The ProComp 1.25-Inch Leveling Kit Chevy Colorado GMC Canyon is the right choice for 2015 and newer Colorado and Canyon owners, including ZR2 models, who want a precision-built billet aluminum leveling solution that reduces factory rake, adds 1.25 inches of front lift, and creates clearance for up to 31-inch tires without cutting bolts or making permanent modifications. Shop this kit and more premium Colorado and Canyon suspension upgrades at IMM Hawaii Parts, your trusted source for leveling and lift solutions for Chevy and GMC mid-size trucks.
Need help finding the right parts for your vehicle? Contact IMM Hawaii Parts today for expert advice and personalized support.
