The ProComp 3 Inch Leveling Kit GM 1500 2WD 2019 and newer Chevy Silverado 1500 and GMC Sierra 1500 2WD gives half-ton GM truck owners a clean and properly engineered front leveling solution that adds 3 inches of front lift, reduces the factory rake, and creates room for larger tires without compromising the factory ride quality or requiring any cutting of strut bolts during installation. This kit includes a tapered top mount spacer for correct strut position and angle, a lower horseshoe spacer, and all required hardware for a complete bolt-on installation that optimizes strut geometry to help extend strut life rather than working against it. At IMM Hawaii Parts, we carry this kit for Silverado and Sierra 1500 2WD owners who want a properly built leveling solution engineered for their specific truck.
ProComp 3 Inch Leveling Kit GM 1500 2WD 2019 Tapered Top Mount Spacer for Correct Strut Geometry
The tapered top mount spacer included in this kit is one of the most important components that separates this leveling solution from basic flat spacer alternatives. A flat spacer simply pushes the strut down without correcting the angle, which puts the strut in a compromised position that accelerates wear and can cause handling issues over time. The tapered design of this ProComp spacer corrects the strut position and angle after the lift is installed, keeping the strut operating within a geometry range that is closer to factory intent and helping extend the service life of the strut through regular driving on the leveled truck. This attention to geometry correction is one of the reasons customers at IMM Hawaii Parts choose this kit over cheaper alternatives.
No Strut Bolt Cutting Required for a Clean Bolt-On Install
This leveling kit installs using a bolt-on process that does not require cutting any strut bolts at any point during installation, which is a meaningful advantage for Silverado and Sierra 1500 owners who want a clean and reversible lift without permanently altering any factory components. The tapered top mount spacer and lower horseshoe spacer install at their respective locations using the existing factory hardware and mounting points, keeping the strut assembly intact and the installation fully reversible if needed. This no-cut approach also makes future strut service or removal straightforward without dealing with previously cut hardware.
Creates Clearance for Up to 33 Inch Tires
The 3 inches of front lift this kit delivers creates enough clearance on the 2019 and newer Silverado and Sierra 1500 2WD to run tires up to 33 inches in diameter on a zero offset wheel without rubbing under standard conditions. Moving to 33-inch tires on a leveled Silverado or Sierra 1500 gives the truck a noticeably more aggressive and capable appearance while improving ground clearance for light off-road use and daily driving over uneven terrain. Wheel width, offset, and vehicle-specific variations can affect fitment, so always confirm your wheel-and-tire combination before finalizing your setup.
Engineered for Durability and Everyday Drivability
This leveling kit is built to perform reliably through regular daily driving, highway use, and light off-road conditions without requiring maintenance or adjustment after installation. The tapered spacer design and correct strut geometry mean the front suspension continues to behave predictably and comfortably after the lift is added, preserving the everyday drivability that makes the Silverado and Sierra 1500 such capable and practical daily drivers. At IMM Hawaii Parts, we recommend this kit for 2WD Silverado and Sierra 1500 owners who want a level stance without sacrificing the ride quality and handling their truck came with from the factory.
Product Details
|
Specification |
Details |
|
Compatible Vehicles |
2019 and Newer Chevy Silverado 1500 2WD, 2019 and Newer GMC Sierra 1500 2WD |
|
Brand |
Pro Comp |
|
Lift Height |
3 inches Front |
|
Top Mount Spacer |
Tapered for Correct Strut Position and Angle |
|
Lower Spacer |
Horseshoe Design |
|
Hardware |
All Required Hardware Included |
|
Strut Bolt Cutting |
Not Required |
|
Max Tire Size |
Up to 33 inches on Zero Offset Wheel |
|
Install Type |
Bolt On |
|
Factory Ride Quality |
Preserved |
Who Should Choose This Kit?
The ProComp 3 Inch Leveling Kit GM 1500 2WD 2019 and newer Chevy Silverado 1500 and GMC Sierra 1500 2WD owners who want a properly engineered front leveling solution with tapered strut geometry correction, no bolt cutting required, and clearance for up to 33-inch tires. Shop this kit and more premium GM 1500 leveling solutions at IMM Hawaii Parts, your trusted source for Silverado and Sierra suspension upgrades that perform as good as they look.
Whether you're upgrading or replacing parts, contact IMM Hawaii Parts today for reliable products and exceptional customer support.
Frequently Bought Together
-
Sale
Vendor: ReadyLift
ReadyLift 6'' MAX2.1 Suspension System W/ Falcon 2.1 Shocks- 2020-2025 GM Silverado / Sierra 2500HD/3500HD
Sale price $3,620.00Regular price $3,995.00 -
Sale
Vendor: ReadyLift
ReadyLift 3'' SST Lift Kit With Fabricated Control Arms And Falcon 1.1 Monotube Shocks- GM Silverado / Sierra 2500HD/3500HD 2020-2026
Sale price $1,695.00Regular price $1,899.00 -
Sale
Sold out
Vendor: ReadyLift
ProComp 2.5 INCH LEVELING KIT FOR 2020-2026 CHEVY/GMC 2500HD & 3500 HD 4WD
Sale price $210.00Regular price $280.00 -
Sold out
Vendor: ProComp
ProComp 2" Lower Strut Mount Leveling Kit — GM 1500 (2019–2021)
Regular price $75.00