ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 4 Suspension System, Tubular, Triple Rate Rear Springs

The ICON 2024-2025 Toyota Tacoma Stage 4 Tubular Suspension brings serious off-road suspension performance to the new Tacoma platform through a complete front and rear upgrade built around tubular upper control arms, remote reservoir coilovers, and triple-rate rear springs. Where the Stage 4 Billet system uses CNC-machined billet aluminum UCAs, this version delivers the same front and rear damping performance with tubular steel upper control arms that correct alignment geometry, add caster, and improve suspension clearance at a more accessible price point. For 2024 and 2025 Tacoma owners who want maximum capability and balanced performance on every type of terrain, the ICON 2024-2025 Toyota Tacoma Stage 4 Suspension System Tubular is a complete and well-matched solution.

ICON 2024-2025 Toyota Tacoma Stage 4 Tubular Suspension UCAs With Delta Joint PRO

The tubular upper control arms in this system are engineered to correct the front end geometry changes that come with lifting the 2024 and 2025 Tacoma, adding caster correction and improving suspension component clearance at full travel. Each UCA features ICON's patented Delta Joint PRO with 90 degrees of total articulation, replacing the factory ball joint and allowing full bump and droop travel without bind through the complete range of suspension movement. The Delta Joint PRO is fully serviceable and rebuildable, protecting your long-term investment in this suspension system without requiring full arm replacement when the joint eventually needs attention.

2.5 Series Remote Reservoir Front Coilovers for Maximum Damping Performance

The front of the Stage 4 Tubular system uses ICON 2.5 Series coilovers with remote reservoirs and vehicle-specific tuned coil springs that deliver a smooth and responsive feel throughout the full range of front suspension travel. The remote reservoirs significantly increase oil volume and cooling surface area, helping the dampers resist overheating and cavitation during aggressive driving so performance stays consistent when conditions get demanding. Front lift is adjustable from 1.25 to 3 inches, giving you clearance for larger and more aggressive wheel and tire setups. Corrosion-resistant CAD-plated coilover bodies with 7/8 inch shafts add durability through extended outdoor use.

Front Differential Drop Kit for CV Protection on 4WD Models

On 4WD Tacoma models, front differential drop brackets work alongside ICON's Tacoma-specific coilover lengths to maximize usable front suspension travel and reduce the risk of CV bind after the lift is installed. Polyurethane differential mounting bushings replace the soft factory units to limit differential movement under load and improve driveline stability during hard acceleration and demanding off-road use. This combination ensures the front suspension operates within safe CV operating angles across the full adjustable lift range.

Triple Rate Rear Coil Springs Matched With 2.5 Aluminum Series Rear Shocks

The rear of this system uses ICON triple-rate rear coil springs that provide a more progressive and capable spring response than standard dual-rate alternatives. The triple rate design delivers comfort at light loads, added support at moderate loads, and firm resistance against bottoming out when the suspension is pushed hard on the trail. These springs provide 0.5 inches of rear lift and are matched with ICON 2.5 Aluminum Series remote reservoir rear shocks with 7/8 inch shafts for a balanced and consistent front-to-rear suspension tune. FK rod end bearings throughout the system provide long service life and minimal deflection under load.

Important Application Notes

This kit is configured for 4WD Tacoma models. On 2WD models, the front differential drop is not required, and the remaining components can be purchased individually. This system is not compatible with Adaptive Variable Suspension-equipped Tacomas or submodels equipped with rear leaf springs. ADAS recalibration is required after installation. An adjustable track bar is recommended, but not required, to realign the axle after installation. The added accessory weight will alter the final lift range from the stock-based measurements shown.

System Components

Product Details

Who This System Is For

The ICON 2024-2025 Toyota Tacoma Stage 4 Tubular Suspension is the right choice for Tacoma owners who want remote reservoir damping performance, tubular UCA geometry correction, and triple-rate rear springs in a complete and well-matched suspension package. With adjustable front lift from 1.25 to 3 inches, Delta Joint PRO articulation, and a balanced front-to-rear tune, this system gives the 2024 and 2025 Tacoma serious off-road capability and improved daily ride quality at a competitive price point compared to the billet UCA version.