ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 3 Suspension System, Billet, Triple Rate Rear Springs

The ICON 2024-2025 Toyota Tacoma Stage 3 Billet Suspension system is a complete front and rear upgrade built for serious Tacoma drivers who want billet aluminum upper control arm construction, internal reservoir front coilovers, and triple rate rear springs in a single well-matched package. This system pairs vehicle-specific tuned 2.5 Series front coilovers with billet aluminum UCAs featuring Delta Joint PRO, and matches the front to a rear setup using 2.0 Aluminum Series remote reservoir shocks and triple-rate coil springs for a balanced and capable suspension tune across all driving conditions. For 2024 and 2025 Tacoma owners who want billet quality at the Stage 3 level, the ICON 2024-2025 Toyota Tacoma Stage 3 Billet Suspension delivers it in a complete and properly engineered system.

ICON 2024-2025 Toyota Tacoma Stage 3 Billet Suspension UCAs With Delta Joint PRO

The billet aluminum upper control arms in this system are CNC machined from 6061 aircraft-grade aluminum and designed to correct front-end geometry on the lifted Tacoma, adding caster correction and improving suspension clearance at full travel. Each UCA features ICON's patented Delta Joint PRO with 90 degrees of total articulation, replacing the factory ball joint to allow full bump and droop travel without bind. Unlike the tubular UCA systems, these billet arms also provide on-vehicle camber and caster adjustability for precise alignment correction on lifted vehicles. The Delta Joint PRO is fully serviceable and rebuildable for long-term use.

2.5 Series Internal Reservoir Coilovers for Heat Management and Consistent Performance

The front of the Stage 3 Billet system uses ICON 2.5 Series coilovers with internal reservoirs and vehicle-specific tuned coil springs that deliver a smooth and predictable feel through the full range of front suspension travel. The internal reservoir design provides excellent heat management during sustained off-road use, keeping damper performance consistent in conditions where standard shocks would begin to fade. Front lift is adjustable from 1.25 to 3 inches over stock, creating clearance for larger and more aggressive wheel and tire combinations. Corrosion-resistant CAD-plated coilover bodies with 7/8 inch shafts and FK rod end bearings throughout add durability and minimal deflection under load.

Front Differential Drop Kit for CV Protection on 4WD Models

On 4WD Tacoma models, front differential drop brackets work alongside ICON's Tacoma-specific coilover lengths to maximize usable front suspension travel and reduce the risk of CV bind after the lift is installed. Polyurethane differential mounting bushings replace the softer factory units to limit differential movement under load and improve driveline stability during hard acceleration and demanding off-road use.

Triple Rate Rear Coil Springs With 2.0 Aluminum Series Remote Reservoir Rear Shocks

The rear of this Stage 3 Billet system uses ICON triple rate rear coil springs that provide a more progressive and capable spring response than standard dual rate designs. The triple rate setup delivers comfort at light loads, added support under moderate loading, and firm resistance against bottoming out when the suspension is pushed hard on the trail. These springs provide 0.5 inches of rear lift and are matched with ICON 2.0 Aluminum Series remote reservoir rear shocks with 5/8 inch shafts for a balanced front-to-rear suspension tune.

Important Application Notes

This kit is configured for 4WD Tacoma models. On 2WD models, the differential drop is not required, and remaining components can be purchased individually. This system is not compatible with Adaptive Variable Suspension equipped Tacomas or submodels with rear leaf springs. ADAS recalibration is required after installation. An adjustable track bar is recommended but not required. Added accessory weight will alter the final lift range.

System Components

Product Details

Who This System Is For

The ICON 2024-2025 Toyota Tacoma Stage 3 Billet Suspension is the right choice for Tacoma owners who want billet aluminum UCA construction with on-vehicle camber and caster adjustability, internal reservoir front coilovers, and triple rate rear springs in a complete Stage 3 package. With Delta Joint PRO articulation, a balanced front-to-rear tune, and adjustable front lift from 1.25 to 3 inches, this system gives the 2024 and 2025 Tacoma serious suspension capability for both daily driving and demanding trail use.