ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 3 Suspension System, Tubular, Overland Rear Springs

The ICON 2024-2025 Toyota Tacoma Stage 3 Tubular Suspension is built for Tacoma owners who want a well-rounded suspension upgrade with internal reservoir front coilovers, tubular upper control arms with Delta Joint PRO, and overland-specific rear springs matched with remote reservoir rear shocks. This system is specifically configured for Tacoma owners who carry consistent rear loads from overlanding gear, accessories, and cargo, with the overland rear springs designed to perform optimally with approximately 600 pounds of added rear weight. For the 2024 and 2025 Tacoma, the ICON 2024-2025 Toyota Tacoma Stage 3 Suspension System Tubular delivers the right combination of front end geometry correction, adjustable lift, and rear load capability in a single complete package.

ICON 2024-2025 Toyota Tacoma Stage 3 Tubular Suspension UCAs With Delta Joint PRO

The tubular upper control arms included in this system correct front-end geometry on the lifted Tacoma, add caster correction, and increase suspension component clearance at full travel. Each UCA is equipped with ICON's patented Delta Joint PRO, which provides 90 degrees of total articulation and replaces the factory ball joint to allow full bump and droop travel without the binding that limits factory-style ball joints. The Delta Joint PRO is fully serviceable and rebuildable, extending the usable life of the control arm and protecting your investment through years of regular use on and off the road.

2.5 Series Front Coilovers With Internal Reservoirs

The front of the Stage 3 Tubular system uses ICON 2.5 Series coilovers with internal reservoirs and vehicle-specific tuned coil springs that deliver a confident and controlled feel throughout the full range of front suspension travel. The internal reservoir design provides excellent heat management during sustained off-road driving, keeping damper performance consistent through demanding terrain where lesser shocks would begin to fade. Front lift is adjustable from 1.25 to 3 inches over stock, creating room for larger and more aggressive wheel and tire combinations. Corrosion-resistant CAD-plated coilover bodies with 7/8 inch shafts add long-term durability through regular outdoor exposure.

Front Differential Drop Kit for CV Angle Correction on 4WD Models

On 4WD Tacoma models, the front differential drop kit works alongside ICON's Tacoma-specific coilover lengths to maximize usable front suspension travel and reduce the risk of CV bind after the lift is installed. Polyurethane differential mounting bushings replace the softer factory units to limit differential movement under load and improve driveline stability. This combination keeps CV operating angles within safe parameters across the full adjustable front lift range.

Overland Rear Springs With 2.0 Aluminum Series Remote Reservoir Rear Shocks

The rear of this Stage 3 system is built around ICON's overland-specific dual-rate rear coil springs designed to work optimally with approximately 600 pounds of added rear weight from overlanding gear, roof racks, cargo, and accessories. These springs provide 0.5 inches of rear lift under that load condition and deliver improved ride quality and performance compared to stock rear springs under load. The springs are matched with ICON 2.0 Aluminum Series remote reservoir rear shocks with 5/8 inch shafts for a balanced front-to-rear suspension tune that handles both on-road and off-road conditions with equal capability.

Important Application Notes

This kit is configured for 4WD Tacoma models. On 2WD models, the front differential drop is not required. This system is not compatible with Adaptive Variable Suspension equipped Tacomas or submodels with rear leaf springs. ADAS recalibration is required after installation. An adjustable track bar is recommended but not required. The advertised lift range assumes approximately 600 pounds of additional rear weight, so changes in vehicle loading will alter the final rear lift height.

System Components

Product Details

Who This System Is For

The ICON 2024-2025 Toyota Tacoma Stage 3 Tubular Suspension is the right choice for overlanding and heavily loaded Tacoma owners who want tubular UCA geometry correction, internal reservoir front coilovers, and overland-specific rear springs that perform best under consistent cargo and gear loads. With adjustable front lift from 1.25 to 3 inches, Delta Joint PRO articulation, and a rear system tuned for overlanding weight, this system gives the 2024 and 2025 Tacoma the suspension capability needed for serious loaded off-road and overland use.