ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 2 Suspension System, Tubular, Triple Rate Rear Springs

The ICON 2024-2025 Toyota Tacoma Stage 2 Tubular Suspension gives 2024 and 2025 Tacoma owners a complete and well-matched suspension upgrade that improves wheel travel, front end geometry, and rear damping performance in a single package. Built around internal reservoir 2.5 Series front coilovers, tubular upper control arms with Delta Joint PRO, and triple rate rear coil springs matched with internal reservoir rear shocks, this system is designed for Tacoma owners who want real performance gains on the trail and a noticeably improved ride on the road without stepping into the remote reservoir tier. The ICON 2024-2025 Toyota Tacoma Stage 2 Suspension System Tubular is a balanced and capable choice for daily-driven and trail-ready Tacoma builds alike.

ICON 2024-2025 Toyota Tacoma Stage 2 Tubular Suspension UCAs With Delta Joint PRO

The tubular upper control arms in this system are built to correct front-end geometry after a lift is installed on the 2024 and 2025 Tacoma, adding caster correction and improving suspension clearance at full travel. Each arm features ICON's patented Delta Joint PRO with 90 degrees of total articulation, replacing the factory ball joint to allow full bump and droop travel without the bind that limits OE-style joints at lifted ride heights. The Delta Joint PRO is fully serviceable and rebuildable, meaning the joint can be refreshed as needed rather than requiring full arm replacement when wear eventually occurs.

2.5 Series Internal Reservoir Coilovers for Consistent Front Performance

The front of the Stage 2 Tubular system uses ICON 2.5 Series coilovers with internal reservoirs and vehicle-specific tuned coil springs. The internal reservoir design provides excellent cooling and consistent damping performance through sustained off-road driving where heat buildup would cause performance to drop in a standard shock setup. Front lift is adjustable from 1.25 to 3 inches over stock, creating the clearance needed for larger wheel and tire combinations. Corrosion-resistant CAD-plated coilover bodies with 7/8 inch shafts and FK rod end bearings throughout add long-term durability and minimal deflection under load.

Front Differential Drop Kit for CV Angle Protection on 4WD Models

For 4WD Tacoma models, the included front differential drop brackets work alongside ICON's Tacoma-specific coilover lengths to optimize CV operating angles and maximize usable front suspension travel after the lift is installed. Polyurethane differential mounting bushings replace the softer OE units to limit differential movement under load and improve control and durability during hard acceleration and demanding off-road use.

Triple Rate Rear Coil Springs With 2.0 Aluminum Series Internal Reservoir Rear Shocks

The rear of this system uses ICON triple rate rear coil springs that deliver a more progressive and capable spring response than standard dual rate designs. The triple rate setup provides a comfortable initial rate for daily driving, added support at moderate loads, and firm resistance against bottoming out when the suspension is pushed hard on the trail. These springs deliver 0.5 inches of rear lift and are matched with ICON 2.0 Aluminum Series internal reservoir rear shocks with 5/8 inch shafts for a balanced and composed front-to-rear suspension tune across all driving conditions.

Important Application Notes

This kit is configured for 4WD Tacoma models. On 2WD models, the differential drop is not required, and remaining components can be purchased individually. This system is not compatible with Adaptive Variable Suspension-equipped Tacomas or submodels with rear leaf springs. ADAS recalibration is required after installation. An adjustable track bar is recommended but not required to realign the axle. Added accessory weight will alter the final lift range from stock-based measurements.

System Components

Product Details

Who This System Is For

The ICON 2024-2025 Toyota Tacoma Stage 2 Tubular Suspension is the right choice for 2024 and 2025 Tacoma owners who want a complete suspension upgrade with tubular UCA geometry correction, internal reservoir coilovers front and rear, and triple rate rear springs for improved ride quality across all load conditions. With adjustable front lift from 1.25 to 3 inches and Delta Joint PRO articulation, this system delivers meaningful performance gains over stock at a competitive price point within the ICON Tacoma suspension lineup.