Serious overland builds run out of room fast once fuel cans, recovery boards, and trail tools enter the picture. The CBI Swing Arm Multi Mount solves that problem by turning the rear swing arm into a real cargo platform. Built for trail-focused trucks and SUVs across Hawaii and beyond, this mount gives adventurers a strong, organized way to carry essential gear right at the back of the rig where it stays easy to reach.
Why the CBI Swing Arm Multi Mount Matters on Long Trips
The mount bolts directly onto any CBI swing arm and opens up a grid-style mounting pattern for stacking gear in the layout that suits your trip. Whether you are heading into remote valleys on the Big Island or running a multi day overland route across Maui backroads, the layout flexibility means fuel, water, recovery boards, and tools all ride securely without competing for roof rack space.
Carry Up to Two 4 Gallon Rotopax Containers
Range is everything on remote drives, and this mount supports up to two 4-gallon Rotopax containers at the same time. That means you can carry extra fuel, water, or a mix of both depending on the trip plan. The mounting positions hold the containers tight against trail vibration, so there is no shifting, no rattle, and no risk of losing a can on a rough section.
Compatible With Maxtrax MK2 and Maxtrax Lite
Recovery boards are a must-have when overlanding in soft sand, loose dirt, or muddy ruts. The mount works with both Maxtrax MK2 and Maxtrax Lite boards through the Prinsu Universal Maxtrax Mount, which is required separately. Once installed, the boards sit ready to grab the moment a tire starts to spin, saving real time on the trail.
Grid Mounting Pattern for Custom Builds
Every overlander builds differently, and the grid pattern across the mount lets you place accessories exactly where they make sense for your routine. Add a high lift jack bracket, a shovel mount, an axe holder, or a Pelican case rail, and the layout still stays tidy. The mount grows with your build instead of locking you into one fixed setup.
Heavy Duty Build for Real Trail Use
Strength matters when you are loading fuel cans and recovery gear onto a rear arm that swings out hundreds of times over the life of the rig. The CBI Swing Arm Multi Mount is built from heavy duty material with reinforced mounting points, so it handles full loads and rough roads without flexing, cracking, or loosening over time.
Important Note on Required Hardware
This mount is designed to bolt directly to a CBI swing arm, which is required and sold separately. The Prinsu Universal Maxtrax Mount is also required if you plan to carry Maxtrax recovery boards. Rotopax fuel cans, Maxtrax boards, and other accessories shown in build photos are sold separately.
Product Specifications
| Specification |
Details |
| Product Type |
Swing Arm Accessory Mounting Platform |
| Designed For |
CBI Swing Arm Systems |
| Rotopax Capacity |
Up to Two 4 Gallon Rotopax Containers |
| Recovery Board Compatibility |
Maxtrax MK2 and Maxtrax Lite (with Prinsu Universal Maxtrax Mount) |
| Mounting Pattern |
Grid Style for Accessory Customization |
| Build |
Heavy Duty Construction |
| Install Type |
Direct Bolt-On to CBI Swing Arm |
What You Get
| Item |
Included |
| Swing Arm Multi Mount Platform |
Yes |
| Mounting Hardware |
Yes |
| CBI Swing Arm |
No (Required Separately) |
| Prinsu Universal Maxtrax Mount |
No (Required for Maxtrax Boards) |
| Rotopax Containers |
No (Sold Separately) |
| Maxtrax Recovery Boards |
No (Sold Separately) |
Best For: Overland builders running a CBI rear bumper and swing arm who want to expand cargo capacity for fuel, water, recovery boards, and trail accessories without crowding the roof rack.
For Hawaii adventurers building rigs that handle real backcountry trips, the CBI Swing Arm Multi Mount turns the rear of the truck into a smart, organized gear hub. IMM Hawaii Parts also handles bumper, swing arm, and accessory installation at our Maui shop, so you can plan a full rear build and roll out trail ready in one visit.
