The ProComp 2.5 Inch front Leveling Kit Toyota Tundra gives 2007 through 2021 4WD Tundra owners a clean and straightforward way to level the factory rake, add 2.5 inches of front lift height, and create room for larger tires without any cutting, welding, or complicated modifications to the truck. Built from laser-cut steel strut spacers with a durable hammertone powder coat finish and including differential drop spacers to maintain proper CV operating angles on 4WD models, this kit is a complete and value-packed front leveling solution for the Tundra platform that installs with a simple bolt-on process and preserves the factory ride quality throughout.
ProComp 2.5 Inch Leveling Kit Toyota Tundra Bolt On With No Cutting Required
Every component in this kit installs using existing mounting points on the 2007 through 2021 Toyota Tundra 4WD without requiring any cutting of factory components or permanent modifications to the truck structure. The laser-cut steel strut spacers install above the existing factory struts and deliver the 2.5 inches of front lift height cleanly and securely without replacing any factory suspension components. This bolt-on approach keeps the installation straightforward and the factory structure of the Tundra completely intact for owners who want a leveled stance without committing to more involved suspension modifications.
Laser Cut Steel Strut Spacers With Hammertone Powder Coat Finish
The front lift on this kit is achieved through laser-cut steel strut spacers that are precision cut for exact fitment on the 2007 through 2021 Tundra strut assembly. Laser cutting ensures consistent dimensions and clean edges across every spacer, which translates directly into a secure and properly aligned fit on the strut without any adjustment or shimming required. A durable hammertone powder coat finish over the steel protects the spacers from rust, moisture, and corrosion through regular outdoor use in all weather conditions, maintaining the integrity of the spacers long after installation.
Differential Drop Spacers for Proper CV Angles on 4WD Models
On 4WD Tundra models, adding front lift without addressing the differential position creates steeper CV operating angles that accelerate wear on the CV joints and can lead to vibration and driveline issues over time. The ProComp 2.5 Inch Leveling Kit includes differential drop spacers specifically to correct this issue by lowering the differential slightly after the front lift is installed, keeping the CV angles within safe operating parameters throughout the full range of suspension travel. This included differential drop is what makes this kit a 4WD-specific solution rather than a generic spacer lift.
Creates Clearance for Up to 33 Inch Tires
The 2.5 inches of front lift provided by this kit creates enough clearance on the 2007 through 2021 Tundra 4WD to run tires up to 33 inches in diameter without rubbing or trimming under standard conditions. Running a larger tire makes a meaningful difference in the overall look and ground clearance of the leveled Tundra, and 33-inch tires represent a practical and capable upgrade over the factory tire size that works well for both daily driving and light off-road use. Wheel width, offset, and specific vehicle variations may affect fitment, so confirming your specific wheel and tire combination before finalizing the setup is always recommended.
Preserves Factory Ride Quality
This leveling kit is engineered to deliver the leveled stance and increased front clearance without degrading the factory ride quality that makes the Tundra a comfortable daily driver. The strut spacers work with the existing factory struts rather than replacing them, which means the factory damping tune is preserved throughout the lift. For Tundra owners who prioritize daily driving comfort alongside the improved appearance and clearance of a leveled front end, this kit delivers both without compromise.
Product Details
|
Specification
|
Details
|
|
Compatible Vehicle
|
2007 to 2021 Toyota Tundra 4WD
|
|
Brand
|
Pro Comp
|
|
Lift Height
|
2.5 inches Front
|
|
Front Components
|
Laser Cut Steel Strut Spacers
|
|
Finish
|
Hammertone Powder Coat
|
|
Differential Drop
|
Included for 4WD CV Angle Correction
|
|
Max Tire Size
|
Up to 33 inches
|
|
Install Type
|
Bolt On, No Cutting Required
|
|
Factory Ride Quality
|
Preserved
|
|
Kit Specific
|
4WD Models Only
|
Who This Kit Is For
The ProComp 2.5 Inch Front Leveling Kit Toyota Tundra is the right choice for 2007 through 2021 Tundra 4WD owners who want a clean bolt-on front leveling solution that delivers 2.5 inches of front lift, corrects CV angles with an included differential drop, and creates clearance for tires up to 33 inches without cutting or permanent modifications. Strong laser-cut steel construction, a durable powder coat finish, and preserved factory ride quality make this kit a reliable and practical leveling upgrade for the Tundra 4WD platform. At IMM Hawaii Parts, we offer genuine Pro Comp leveling kits that deliver reliable performance, quality construction, and the perfect fit for your Toyota Tundra.
Have questions or need assistance? Contact IMM Hawaii Parts today for expert support and guidance.
